New-media-technology IP Power 9212 User Manual download pdf (Page 8)

IP POWER 9212 USER MANUAL

4. Hardware & Software installation

Before you star to use IP Power 9212, please follow the steps below:

 Check the package to make sure the contents is complete.

 Prepare one Ethernet HUB, or Router

 Check the voltage of the power supply to make sure it is AC 110-240 volt

Hardware Installation : Connect RJ45 first then POWER jack

1 Connect the 9200 to HUB through RJ 45 netting cable.

2 Connect the 9200 (IN) to 9201 & 9200 ( OUT ) to 9202 through D-SUB cable.

Please connect 9200 D-SUB IN to 9200 IN port

& 9200 D-SUB OUT to 9202 OUT port

3 Connect the HUB to the Internet (May through ADSL/XDSL modem).

4 Connect the power adapter to the 9200.

Power on your computer and power adapter of IP POWER 9212.

9201Pro Hardware connection (recommend):

For different request of normal state of electric equipment, 9201 offers four sets of voltage signal

IN1-IN4 and four sets of shortcut circuit signals IN5-IN8.

9201 Pro provide 4set Source mode - Voltage Input – Out 1 ~ Out 4

ON : 4V~24V

OFF : 0V ~ 3V

4 set Sink mode - Resistance input – Out 5 ~ Out 8.

ON : 200 ohm~ 0 ohm

OFF : 500 ohm ~ ∞

1. The polarity: Right - Positive & Left – Negative .

VER. X.X,

- 7 -

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 25 26

No comments

New-media-technology IP Power 9212 User Manual Page 8